Our Insole blanks > NovaPED sensoCAD
NovaPED sensoCAD
Sensomotoric insole concept
for holistic and active care
For many years, sensomotoric insoles
have been successfully used to treat
various foot misalignments, functional
complaints and deviations from
standard physiological gait.
With their specially shaped elements,
the insoles exert targeted sensory
stimuli on the sole of the foot, which
cause motor reactions through muscle
tension or relaxation. In this way,
malpositions and imbalances can be
corrected.
Sensomotoric insoles are used for
children and adults.
Composition and construction
The NovaPED sensoCAD orthopaedic
foot supports are made of EVA with
a Shore A hardness of approx. 35°.
On the bottom, the supports are
reinforced with a film composite
material about 0.8 mm thick, which
varies in colour to distinguish the
individual models from each other.
The supports have a uniform
basic structure. The
design of the individual
elements varies depending
on the model, to give
differing intensity to different
stimuli.
This provides the basis for a wide
range of care opportunities.
The supports are available with a flat
heel and a heel shell. If a shoe does
not provide sufficient stability and
heel guidance, we recommend using a
support with a heel shell.
In line with a medical prescription, a
healthcare technician processes the
NovaPED sensoCAD orthopaedic foot
support individually for a customer.
Novaped sensoCAD neutral*
Product focus
The neutral model is used for a physiological foot with a neutral gait pattern, for example. It can also be used to balance contralateral care.
Material
The NovaPED sensoCAD orthopaedic foot supports are made of EVA with a Shore A hardness of 35°. On the bottom, they are reinforced with film material with orange-coloured
pictograms.
Possible uses:
- Neutral gait (balancing insole)
- Normal foot (balancing insole)
Additionally:
Art. no. left |
Art. no. right |
Description |
Size |
773402-000 |
773401-000 |
Novaped sensoCAD neutral with flat heel |
19-50 |
773502-000 |
773501-000 |
Novaped sensoCAD neutral with heel cup |
19-50 |
In line with a medical prescription, this support can be suitably individually adjusted for a customer by a healthcare technician into a special construction, for example for a normal foot.
Novaped sensoCAD planovalgus*
Product focus
An insufficiently active M. tibialis
posterior leads, among other things, to a skew foot, fallen arches or flat feet. In order to support the active lifting of the heel, the medial heel element can be used to give a
corresponding impulse to the
muscle.
Material
The supports in the NovaPED
sensoCAD series are made of EVA with a Shore A hardness of 35°. On the bottom, the supports are
reinforced with a film composite material. The NovaPED sensoCAD planovalgus insoles are marked with green pictograms.
Possible uses:
- Externally rotated gait
- Skew foot
- Fallen arches
- Flat feet
Additionally:
- Valgus leg axis
- Achilles tendon complaints
- Knee pain, e.g. runner’s knee, jumper’s knee
- Hallux valgus
Art. no. left |
Art. no. right |
Description |
Size |
773412-000 |
773411-000 |
Novaped sensoCAD planovalgus with flat heel |
19-50 |
773512-000 |
773511-000 |
Novaped sensoCAD planovalgus with heel cup |
19-50 |
In line with a medical prescription, this support can be suitably individually adjusted for a customer by a healthcare technician into a special construction, for example for a skew-splay foot.
Novaped sensoCAD adductus*
Product focus
If the effectiveness of the M.
peroneus longus is weakened, it can
bring about changes such as pigeon
toes. Here, the lateral heel element
can lead to activation of the muscle,
to compensate for the existing
muscle imbalance and restore the
physiological foot shape.
Material
EVA with a Shore A hardness of 35°
is the basic material of the NovaPED
sensoCAD orthopaedic foot supports.
The film composite material with
yellow pictograms reinforces the
bottom.
Possible uses:
- Internally rotated gait
- Pigeon toes
- Previously treated club foot
Additionally:
- Varus leg axis
- Achilles tendon complaints
- Knee pain, e.g. runner’s knee, jumper’s knee
Art. no. left |
Art. no. right |
Description |
Size |
773422-000 |
773421-000 |
Novaped sensoCAD adductus with flat heel |
19-50 |
773522-000 |
773521-000 |
Novaped sensoCAD adductus with heel cup |
19-50 |
In line with a medical prescription, this support can be suitably individually adjusted for a customer by a healthcare technician into a special construction, for example for pigeon toes.
Novaped sensoCAD cavus*
Product focus
If the small foot muscles are
insufficiently active, high arches are encouraged. To counteract this, stimulus-providing toe and midfoot elements can be positioned on the foot.
Material
The NovaPED sensoCAD models are made of EVA with a Shore A hardness of 35°. A film composite material with blue pictograms is fixed to the bottom to reinforce the models.
Possible use:
Additionally:
- Achilles tendon complaints
- Plantar fasciitis
Art. no. left |
Art. no. right |
Description |
Size |
773432-000 |
773431-000 |
Novaped sensoCAD cavus with flat heel |
19-50 |
773532-000 |
773531-000 |
Novaped sensoCAD cavus with heel cup |
19-50 |
In line with a medical prescription, this support can be suitably individually adjusted for a customer by a healthcare technician into a special construction, for example for high arches.
Novaped sensoCAD equinus*
Product focus
Neuromuscular diseases or
neurological disorders are a possible
cause of increased muscle tone of M.
gastrocnemius, which may cause pes
equinus or walking on tiptoe. The toe
element and the midfoot element
help to reduce the increased muscle
tension. This can put the foot back
in a physiological position and make
heel contact possible.
Material
The NovaPED sensoCAD orthopaedic
foot supports are made of EVA with
a Shore A hardness of 35° and
reinforced with film material with
red pictograms on the bottom.
Possible uses:
- Walking on tiptoe
- Pes equinus
Additionally:
- Achilles tendon complaints
Art. no. left |
Art. no. right |
Description |
Size |
773442-000 |
773441-000 |
Novaped sensoCAD equinus with flat heel |
19-50 |
773542-000 |
773541-000 |
Novaped sensoCAD equinus with heel cup |
19-50 |
In line with a medical prescription, this support can be suitably individually adjusted for a customer by a healthcare technician into a special construction, for example for pes equinus.
Customisation elements
The NovaPED sensoCAD orthopaedic foot supports are processed
individually for each customer by
a specialist. The orthopaedic foot
supports can, for example, be
specially adjusted to a customer and their footwear by grinding.
Further adjustments are made
possible by the NovaPED sensoCAD elements, in order to amplify
stimulus on the foot in a targeted way. Targeted individual areas can be raised with the selective raising elements. The strip element is used for a flat adjustment.
These elements are simply welded to the bottom of the supports, without adhesive, and have a thickness of approx. 3 mm and a Shore A hardness of 30°.
Our add-on parts for S90 orthopaedic foot supports offer additional
customisation options, e.g. heel raising. Detailed information can be found in our NovaPED S90 elements catalogue
Novaped S90 elements or on
Downloads
Art. no. |
Description |
Width |
Length |
Packaging unit |
969082-000 |
Novaped sensoCAD Customisation element Dot |
∅ 15mm |
|
10 items |
969080-000 |
Novaped sensoCAD Customisation element Bar |
20 mm |
130 mm |
10 items |
Templates
Additional help is provided by the
optionally available NovaPED
sensoCAD templates. On the one hand, they simplify positioning of the NovaPED sensoCAD elements, and on the other, the integration of the supports into the shoe.
Art. no. |
Description |
Size |
Packaging unit |
961934-000 |
Novaped sensoCAD templates, Size 1 |
19-34 |
Single sizes set |
963550-000 |
Novaped sensoCAD templates, Size 2 |
35-50 |
Single sizes set |
Cover materials
For increased comfort, we
recommend the NovaPED sensoCAD cover material.
A PiGreco cover, lined with 1 mm Multiform 30° Shore A.
Art. no. |
Description |
Size |
Width |
Length |
Packaging unit |
964105-000 |
Novaped sensoCAD cover, Size 1 |
19-34 |
110 mm |
280 mm |
10 items |
964105-000 |
Novaped sensoCAD cover, Size 2 |
35-50 |
155 mm |
360 mm |
10 items |